Pumpkin thermoform

You will need a heat gun to shape this pumpkin ornament.   Instructions: Place the mesh on the negative mold of the pumpkin. (keep the supports on the mold to stabilize it during forming). Heat the mest gently until it droops a bit Press the positive mold into the mesh and negative mold Repeat for the other half Connect them with the stemp clamp. You could put some candy or a small LED light inside if applicable.   Make sure that the following settings are applied under the “Strength” page: Global Sparse infill pattern: 3D hexagon Sparse infill density: 25%   Objects (select only the object that should be made as mesh) Top shell layers: 0 Bottom shell layers: 0