Bento3D — Customize Your Own Box inside MakerWorld

CUSTOMIZE IT DIRECTLY IN MAKERWORLD This is not just one storage box — it’s a box generator. Bento3D was designed specifically for MakerWorld’s Parametric Model Maker. Instead of searching for a container that is almost the right size, click Customize, set the exact dimensions and layout you need, press Generate, and print your own version. Boost MeA Boost helps me keep making useful parametric MakerWorld tools. Thank you!No CAD required Everything can be adjusted directly inside MakerWorld: Width and depth Height Wall thickness Floor thickness Corner radius X dividers Y dividers Lid engagement Lid fit clearance Customize → Generate → Print. That’s it. One generator, many uses Make anything from a small parts tray to a large workshop organizer: Electronics and components Screws and hardware Desk organization Cables and accessories Hobby supplies Craft materials Drawer organization Workshop storage General-purpose containers You don’t download somebody else’s box size — you generate your own. Clean, practical design Bento3D keeps the outside of the box completely clean and smooth. Dividers are generated only inside the box and can be independently controlled in both directions. The box prints upright and the lid prints flat. No supports required. Adjustable lid fit Printer and material tolerances vary, so Bento3D lets you control the lid clearance directly in MakerWorld. The default clearance is 0.20 mm per side, but you can easily make it tighter or looser before generating your model. Suggested print settings PLA or PETG 0.20 mm layer height 4–5 walls/perimeters 15–20% infill No supports A tested print profile is included.