Flexi-Bones Charizard - Articulated Pokémon

Bring the prehistoric past of the Pokémon world into the palm of your hand! This unique 3D model combines the intricate, bony details of a Charizard skeleton with the satisfying movement of a print-in-place, flexible fidget toy. Designed from the ground up to be fully articulated without the need for supports or assembly, this skeleton features a flexible spine, a chain-link tail, and movables hips and skull joints. It's the perfect fusion of a detailed collectible display piece and a dynamic fidget gadget for any Pokémon fan or 3D printing enthusiast. Recommended Print Profile: For the best results and ensure the joints break free easily, please use the following settings. PLA is highly recommended for this model. Material: PLA (Matte or Bone White looks best!) Layer Height: 0.16mm or 0.20mm (lower resolution allows for smoother joint operation). Wall Line Count: 2-3 (increases structural strength of fine bone structures). Infill: 10–15% (Infill Pattern: Gyroid recommended for optimal joint clearance). Print Speed: 50mm/s for walls, 100mm/s for infill (reduce outer wall speed for better tolerance). Build Plate Adhesion: Brim Recommended (This model has small contact points; a 5mm brim prevents detachment during the print). Support: Required! Auto. Tip: When the print finishes, carefully lift the model and slowly flex the spine and tail links to free the joints. They should snap into motion with minimal effort.