Christmas Stable – Nativity Scene Display

Create a warm and festive setting for your Christmas nativity scene with this Christmas Stable. ⭐🎄 The stable features a classic open-front design with a pitched wooden-style roof, supporting beams and decorative details throughout. The back wall includes a sculpted Bethlehem-inspired scene with palm trees, buildings and a large Christmas star, giving the stable a beautiful finished look even before any figures are added.   The interior has been kept open and spacious, leaving plenty of room to arrange your own nativity figures, animals or other Christmas decorations. The partially open sides also help keep the design visually light while making the scene easy to view from different angles. The wooden plank details, roof structure and decorative back wall are all incorporated directly into the model, so it also looks beautiful when printed in a single colour. Try classic wood tones, marble, stone-effect, matte neutral colours or simply print it in your favourite filament.   Ja, ik zou bij de Christmas Stable een apart stukje toevoegen, liefst vlak vóór de Printing Recommendation. Zo zien mensen meteen dat er een bijpassende set bestaat én welk profiel ze daarvoor moeten nemen: ⭐ Matching Nativity Figures Looking for figures to complete your Christmas Stable? I also created a matching 5-piece Nativity Set, including Mary, Joseph, Baby Jesus and two little sheep. 👉 Christmas Nativity Set – 5 Pieces: https://makerworld.com/nl/models/3365335-christmas-nativity-set-5-pieces#profileId-3826976 For this stable, choose the 80% scale print profile of the Nativity Set. The largest figure is approximately 80 mm (3.15 in) tall at this scale and the set is sized to fit nicely inside the stable.   The larger 100 mm (3.94 in) profile is intended as a standalone Nativity Set and is too large for this stable.  📏 Size & Scaling At the original scale, the outside dimensions of the stable are approximately: 220 × 100 × 130 mm (8.66 × 3.94 × 5.12 in) The model is fully scalable, so you can easily resize it to suit your preferred display size or to match the size of your own nativity figures. 🖨️ Printing Recommendation I recommend printing the stable upright, in its normal standing position.   Although placing the stable on its back may require less support, this gives a less attractive finish on the visible front of the model. Because the front details are not completely flat, parts of them would be printed as upward-facing top surfaces, resulting in visible top-layer lines instead of the cleaner finish you get when these details are printed vertically.   For this reason, the included print profile prints the stable upright. This does require more support, but most of the supported areas are located underneath the roof, where any support marks are much less visible. More support, but a much nicer visible finish — which is why I chose this orientation for the print profile. ⭐ Features • Classic Christmas nativity stable • Outside dimensions approximately 220 × 100 × 130 mm (8.66 × 3.94 × 5.12 in) • Fully scalable to your preferred size • Open and spacious interior for your own figures • Decorative Bethlehem-inspired back wall • Christmas star, palm trees and village details incorporated into the design • Detailed wooden-style roof and structural beams • Partially open sides for better visibility of the scene • Looks beautiful printed in a single colour • Decorative details are sculpted directly into the model • Designed with FDM 3D printing in mind • Recommended to print upright for the best visible surface finish