Hello Sidney - Ghostface Desk Buddy No AMS

Bring a touch of horror classicism to your collection with this highly detailed 3D printable figure of Ghostface from the 'Scream' movies. This pensive rendition features the iconic mask, flowing robes, and that famous phone receiver, perfect for a subtle but scary desk decoration or a larger Halloween centerpiece. Capture the terrifying suspense layer by layer. PRINT PROFILE (RECOMMENDED) While user experiences may vary, this model is best printed with settings designed for high detail and minimal failure points. Material: Matte PLA (Black and White for a classic look) is recommended for best finish. PETG or ASA can also be used. Multi-color AMS printing is possible with proper coloring in Bambu Studio. Layer Height: 0.12mm to 0.16mm is strongly recommended for capturing the fine folds of the robe and the detailed mask features. Walls (Perimeters): 2-3 walls to ensure strength for the figure. Infill: 10% to 15% Gyroid or Cubic infill for a good balance of strength and material use. Avoid using too high infill to prevent warping. Supports: Tree supports (Auto) are required and perform very well. First Layer Speed: Print the first layer slowly for reliable adhesion. Scaling: Print at 100% for the intended size. Scale with caution, as details and support removing can get difficult. Consider a clean print bed and proper adhesion.   Please share your makes and give feedback! Happy printing!