Cable Organizer Insert Set for Stylish Storage Box

4 insert layouts in a single download — not just one tray, a whole system. A removable insert tray that sits inside the storage box and turns it into an organized cable/charger drawer. Two end sections line up with the box's built-in handle cutouts and are sized for the bulky plug end of chargers and power adapters; the rest of the tray is divided into parallel lanes for coiled cables. Print the layout that fits your cables today, or print several and swap them as your collection changes — no extra cost, no separate listing, all 4 STL files are in this one download: - Standard: 6 lanes (~19.6mm each) — general-purpose cables (USB,  HDMI, charging cables) - Fine: 10 lanes (~11.1mm each) — thin cables and small cords  (earphones, USB-C, lightning cables) - Large: 4 lanes (~30.3mm each) — thick cables, extension cords,  bulky charging bricks - Grid: 5x2 grid (10 cells, ~24x85mm each) — small coiled cables or  loose accessories that don't need a full-length lane All 4 share the same footprint and the same two end compartments (3 sections each, aligned with the box's handle openings so the charger plugs stay reachable through the cutout) — only the middle section layout changes. Designed as a friction-fit drop-in tray: lift it out to access anything underneath, or to swap in a different layout. Print orientation: as provided, base down, no supports needed for any of the 4 variants (all dividers are self-supporting vertical walls).