Customizable House Number Plate & Address Sign

A house number plate where you can change the plate too, not just the text. Size, thickness, corner radius, margins, line spacing, mounting and every screw dimension are parameters.   Boost MeIf you like this model, please give it a boost 🚀 Thanks so much!  What you can set Number and street name (leave the street empty for a number-only plate) Font: six presets, or any other MakerWorld font. Accents work (Ö, Ő, É, Ñ, Ç, Å). Plate width, height, thickness, corner radius, height of the raised letters Text sizes, margins, gap between the lines, divider line on/off Mounting: hidden keyhole, through hole, or none Screw head and shaft diameter, hole spacing, recess depth Long street names are scaled down automatically so they fit.   The keyholes are recessed into the back only, they don't go through the plate. Leave 2-3 mm of the screw heads standing out of the wall, hang the plate on them and slide it down. Nothing is visible from the front.   Default size: 230 × 170 × 6.6 mm, keyholes 150 mm apart, 30 mm from the top.   Printing ASA or PETG for outdoors, PLA only indoors Flat on the plate, no supports, no brim 3 walls, 15% infill, 0.2 mm layers Tips There is only one colour change: set a filament swap at the plate thickness (5.0 mm by default) and the text comes out in a second colour. No AMS needed. Ironing → Top Surfaces gives the large flat plate a much smoother finish.