Strong Customizable Grabber V1.1

Customizable and Robust Claw Grabber! Attach to ¾ in (sch 40) pvc and 550 paracord to create any length you want! 3 different claw styles to choose from, in 3 or 4 claw format.   Requires:     ¾ in sch 40 PVC     550 paracord     M3x10 (qty=6) cap head screws     M4x12 (qty=3) cap head screws     M4x16 (qty=5) cap head screws     Rubber bands (qty=3) -OR- Ace Hardware Spring #156 (2+11/16 in long, 29/32 in OD, 0.035 in wire gauge)   Parts to Print:     End Body     Plunger     Collet     Link (x3)     Claw (x3)       Handle Body     Tube Holder Right     Tube Holder Left     Trigger   Instructions:     Grabber End:     1. Select claw style and number of claws and print corresponding parts.     2. Cut PVC and paracord to desired lengths     3. Attach links to plunger and claws using M3x10 screws     4. IF using Ace Spring, insert around plunger     5. Attach claws to end body with M4x12 screws     6. IF using rubber bands, attach them now.     7. Insert paracord into plunger and secure with knot     8. Thread paracord through collet and PVC, then secure PVC to end body using collet       Handle End:     1. Attach PVC to handle body using tube holders and M4x15 screws     2. Attach trigger to handle body using M4x15 screw     3. Insert paracord through handle and secure with knot          You are now ready to use the grabber!   CHANGELOG V1.1 Added dual flanges for end body (3 and 4 claw versions) M4 bolts now thread into end body flanges instead of into claws