Ultra-Compact Tobacco Case (All-in-One)

Tired of bulky tobacco pouches that take up too much space in your pockets? This is one of the most compact all-in-one loose tobacco case available on MakerWorld!   Every single millimeter of this model has been optimized to offer maximum efficiency with the smallest possible footprint.   Key features: Ultra-Compact Pocket-Friendly Design: Sleek edges and a rugged design made for everyday carry, fits perfectly into any pocket All-in-One Storage: Dedicated compartments for loose tobacco, rolling papers, and filters Dedicated Tobacco Seal: The tobacco compartment features a tight, secure closure designed to keep your tobacco fresh and prevent messy spills in your pockets 5x2mm magnet to keep tobacco, papers and filters safe Compatibility: Standard “small” papers ( 7 cm length), 6mm slim filters. Not tested with extra slim filters (5.5 mm), but may work well too.   Print and assembly: PLA or PETG, 0.16 mm layer, about 1.5 h, 42 g, no supports needed.   Notes on the TPU print profile: Wait for the print to be completely cool, then test the print in place mechanism: if it has a spring-like action, gently pull on the pins to separate the inner part from the bottom of the mechanism. TPU tends to stick quite firmly   Once the print has cooled completely, gently flex the lid and snap it into place. The magnets should press-fit securely. If they feel a little loose, add a small drop of glue to hold them in place.   If you really love it, consider throwing a Boost 🚀 my way to support future compact designs!