Jack-o'-Lantern Pumpkins, 10 Faces, No Supports

Ten tiny jack-o'-lanterns, each with its own face. Every piece is 22 mm tall in the mini size and 11 mm in the micro size, and the whole batch fits on one A1 mini plate. What you get Mini plate: 10 faces, each about 24 x 22 x 22.5 mm Micro plate: the same 10 faces at exactly half scale, about 12 x 11 x 11 mm Faces: Angry, Sleepy, Shocked, Worried, Grin, Evil, Wink, Upset, Silly, Classic Printing No supports. Every face is a shallow recess, nothing overhangs. 0.4 mm nozzle, 0.20 mm layer height, 2 walls, 15% infill PLA, Matte recommended: the faces read better without gloss Mini batch of 10: 27.71 g, 8.73 m, 1h10m print time Micro batch of 10: 4.88 g, 1.61 m, 19 min print time A note on the micro size The micro version is exactly half the height of the mini, but it uses about a fifth of the filament, not an eighth. The two 0.4 mm walls stay the same thickness on the smaller part, so they take a bigger share. Worth knowing before you scale anything yourself. How to use it Scatter them on a shelf or a table, drop a few in a bowl, hand them out as party favours, or line them up in front of a larger pumpkin. The micro size fits in a matchbox.