Snowflake LED Christmas Ball with LED

Snowflake LED Christmas Ball – Snap-Fit Ornament with Tea Light Holder A hollow 3D-printed Christmas ornament made from an open snowflake lattice. Warm LED light shines through the entire shell, creating a beautiful glowing effect on a Christmas tree. The ornament consists of two printable hemispheres and one multifunctional internal part. The internal part connects both halves, replaces the separate locking clips and holds a standard 38–40 mm battery-powered LED tea light. Features Approx. 80 mm ball diameter Hollow snowflake lattice Two-piece shell for easy FDM printing One-piece snap-fit connector + LED holder Designed for 38–40 mm LED tea lights No glue required PLA or PETG 0.4 mm nozzle recommended 0.16–0.20 mm layer height Assembly Print both hemispheres and the one-piece connector/LED holder. Insert the connector into the lower hemisphere. Place a battery-powered LED tea light into the central holder. Align the upper hemisphere and gently press both halves together until the connector engages. Add a ribbon or cord through the hanging loop. Safety Use battery-powered LED tea lights only. Do not use a real candle or open flame inside the ornament. FDM printing can produce small dimensional variations depending on printer calibration and filament.