Springtrap cosplay

Parts will need to be scaled to fit you (Default is scaled to 12 yrs)  The Bearings used for the jaw have the following dimensions: Outer 16mm -- Inner 5mm -- thickness 5mm aka 625 ball bearings thick sewing elastic will also be needed to hold the pieces, jaw, and hand together For the eyes mesh i just printed some mesh out that i found on maker world Velcro for the hands 4x2 Neodymium Magnet for the back clips to hold together  I used 1.5 yards of felt but fleece also works out 9.7 days to print if you print after print       how to do a piece: Label piece print piece fabricate piece cut piece shade piece (optional) paint piece (if needed) And for the head wires i just cut off some filament of black, blue, and red to achieve it to be more realistic.   For shading the piece you can use an air brush but since i don't have one i just used the Crayola air brush with a sharpie marker inside the compartment. I used 4 sharpies so buy a pack of 5.   Also in the shading, notice how the hip, thighs, and calves are darker shaded than the upper body to have better shading. Boost MeIf you enjoy this model you click this button