5-TIER VENDOR DISPLAY STAND - SIMPLE!!

5-TIER VENDOR DISPLAY STAND   A compact five-tier display stand designed to help vendors organize and showcase merchandise while keeping every item visible and easy for customers to browse.   It works well for craft fairs, vendor markets, coffee-shop shelves, boutique counters, farmers markets, pop-up shops, and checkout displays.   ASSEMBLED DIMENSIONS Width: 215 mm (8.46 in) Depth: 198 mm (7.80 in) Height: 216 mm (8.50 in)   GREAT FOR DISPLAYING  Bookmarks Sticker packs Small puzzles Activity kits Greeting cards and postcards Art prints Flash cards and recipe cards Other lightweight packaged merchandise   WHAT’S INCLUDED The file contains the pieces needed to make one complete five-tier stand: 2 side panels 5 shelf rails 2 connecting clips The connecting clips are included for anyone who wants to print the stand more than once and connect multiple stands side by side.   PRINTING I successfully arranged the pieces across two build plates and printed them on my Bambu Lab P2S. The individual parts can be rearranged in your slicer for other printers. Suggested settings: Material: PLA or PLA+ Layer height: 0.24 mm Walls: 3 Top and bottom layers: 4 Infill: 12–15% gyroid Supports: None Brim: Optional, depending on bed adhesion   ASSEMBLY Dry-fit the five shelf rails between the two side panels. Check that every rail is fully seated and the stand rests evenly. Secure the connections with CA glue or 5-minute epoxy. Allow the adhesive to cure before adding products. Printer tolerances may vary. If you are unsure about dimensional accuracy, test the fit of one shelf rail with one side panel before printing the entire stand.   EXPAND YOUR DISPLAY Need more display space? Print the file a second time to create another five-tier stand. Use the included connecting clips to join the stands side by side for a wider, coordinated vendor display.   This stand is a simple way to turn limited table or shelf space into an organized and professional product display. If you print one, please share a photo of your vendor setup!   This is my first MakerWorld upload! I designed this display for my own small-business vendor setup and hope it helps other makers organize their products too.   If you find the model useful, please consider liking it, leaving a boost, posting a photo of your finished display, and following my profile for more practical vendor-display designs. Your support and feedback will help me improve future uploads!