Flying Ghost Through-Window Illusion (Magnetic)

Boost MeLove this model ? You can support my work & my first time entering a 3D contest with a BOOST if you want (it's free for you) 🙏Flying Ghost Through-Window Illusion (Halloween Decor - No Support) Boo! 👻 Make an adorable little ghost fly right through your windows !   This model is designed to give the illusion that a ghost is literally passing through your glass. Perfect for Halloween decor or just to add a magical touch to your windows. Thanks to its modular design, this model fits all sizes of official Bambu Lab magnets. Whether you have thin single-pane glass or thicker glass, you will find the perfect setup in the options below! Looks spectacular when printed with Glow-in-the-dark filament !   Main Features : 📐 Optimal Size : 13,5 cm long by 8 cm wide. 🪶  Ultra-light & Strong : Under 65g thanks to a hollow yet robust design, preventing the ghost from sliding down the window. ⚙️ 100% Support-Free : Prints entirely in one color on a single plate, no supports to remove. 🧲 Smart Magnet System : Press-fit inserts (no glue needed) with small ejector slots to easily remove magnets with a small screwdriver. The contact faces are engineered with a rough surface to prevent sliding on the glass.   💡 Smart Installation Tip :  Before pushing the magnets into their slots, test them on your window first ! Mark the facing sides with a marker to avoid any polarity mistakes.  Pro-Tip for Maximum Grip : To completely eliminate any risk of scratching your window glass, and to boost adhesion, you can stick a small piece of thin painter's tape (masking tape) over the magnets on the contact faces. This significantly increases friction, preventing the ghost from sliding down due to gravity, even on thick glass or in high-ambient humidity ! Please, look at the pdf joined below (Tips for better grip)   📂 Available Print Profiles (Choose according to your magnets) : ⚙️ How to choose and print your model ? This ghost has been designed to perfectly fit official Bambu Lab magnets. To keep the page clean and easy to navigate, the 30 available configurations have been smartly organized into 6 Print Profiles, each containing multiple build plates. Follow these 2 simple steps : Select the Print Profile that matches the size of your outer magnets (e.g., 6x3 mm Profile). Choose the Build Plate in Bambu Studio or Bambu Handy that matches the central magnet you want to use:     •    Plate 1 (Standard) : 10 identical magnets (the central magnet is the same size as the outer ones).     •    Plates 2 to 5 (Reinforced) : The central magnet is replaced by a larger one for an extra-strong hold (10x3, 12x3, 15x3, or 20x3 mm). Choosing magnets based on your glass thickness : the number and strength of the magnets you need depend on the thickness of the glass or window you are placing the ghost on :     •    Thin glass (1 to 2 mm): 4 to 8 magnets in total are more than enough (the outer magnets alone might do the job).     •    Thicker windows (Standard home windows) : Using the additional central magnet is mandatory to ensure a strong hold through the glass. The thicker your window, the larger the central magnet should be (15x3 or 20x3 mm).   🛒 Where to buy magnets ? Standard neodymium magnets (N35 type) can be easily found on the Bambulab store (links below).   💡Cool Variants !  You love this incredible flying gost named SPARKY ? Prints his best friend named SPOOKY here :  Floating Ghost Through-Window Illusion (Magnetic) - Free 3D Print Model - MakerWorld Do you want a fun kitchen gadget too? Check out the Fridge Magnet,Toothpick & Note Holder ghost model here :  https://makerworld.com/en/models/3338618-funny-ghost-fridge-magnet-multi-purpose-holder#profileId-3792500   Have good prints and a happy Halloween ! 👻