Floating chain candle holder (for LED tealight)

Boost MeHuge thanks for every boost.  A set of candle holders sized for LED tealights with 38mm diameter. If you have one with different dimensions, you have to scale the model accordingly.   I recommend using LED tealights only. I have tested it with real tealights too but since the heat of the candle softens the plastic below, it can become dangerous. Also keep in mind: PLA is not fire-safe.   Printing: Use my shared, pre-configured 3MF print files or use the following settings: 0.40mm nozzle 0.20mm standard profile 8% gyroid infill support type: tree (auto)on build plate only additional manual paint under the bottom side of the floating links support blocker on the platform part: under the center and the elevated surfaces (bridgeable regions) Commercial License: You can subscribe for a commercial license membership on my Patreon (preferred way) or here on MakerWorld: Membership