Canadian Skink Anti-Aircraft Tank 1/35 Scale

Brief Information Development: 1943–1944, WWII, built for the Canadian First Army. Chassis: Grizzly I, Canadian production M4A1 Sherman tank. Armament: Four 20mm autocannons (Hispano early, Polsten later) in a closed cast turret. Skink is a lizard species from Ontario, used as the namesake for this Canadian indigenous design.   ================================   📋 Recommended Print Settings (For Best Results)  Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.  Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.  Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.  Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.  🔧 Assembly Diagram Notes  Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.  Yellow Lines: These are moving parts. Do not apply glue here.