Wearable Thanos Infinity Gauntlet | A1 Mini & All

Wearable Infinity Gauntlet inspired by Thanos's iconic glove, featuring magnetic Infinity Stones so you can snap them into place one by one and wield the full power of the universe! Fully optimized for printing on all 3D printers, including the Bambu Lab A1 Mini. Stop wasting your time and start printing this masterpiece!  Beyond proudly displaying it among your collectibles, you can wear this gauntlet to get ready for the cinema to watch Avengers Endgame Encore — such a cool way to hold your tickets! Plus, if there is enough interest and boosts, a custom bowl insert designed to fit inside the gauntlet is coming soon: it can be printed in PLA Pure (food-contact safe) so you can eat popcorn straight from it 🍿 Let me know in the comments if you want it!   Boost MeBuilding this gauntlet and making it available for free, perfectly balanced, as all things should be, is a challenging task. If you like it, leave a boost!Sizing To make sizing as straightforward as possible, you only need two simple measurements: Place your hand flat on a sheet of paper and trace the outline of your fingers. Using a ruler, measure the width across the knuckles of your middle and ring fingers (left hand). No other measurements are needed: if the fingers fit, the rest of the gauntlet will fit comfortably. My recommendation is to take these measurements and print the fingers first to immediately check the fit. For reference, on my average adult hand, my knuckles measured roughly 23 mm (0,91″) each at these points. At this 100% scale, the gauntlet fits perfectly — I can walk around with my arm hanging straight down and the fingers hold it securely in place without slipping off! To scale the model proportionally to your hand, use this simple formula: Scale (%) = [Your Measurement (mm) x 100] / 23.  Main Features & Smart Cutting No Harsh Cuts: The cuts follow the gauntlet's design lines, making the joints invisible from the outside for a clean look. Minimal Waste: Dividing the model into pieces eliminates the need for large, complex support structures typical of single-piece prints, while still ensuring a smooth surface finish. Easy Printing: Splitting the project reduces individual print session times and the risk of failures, making it accessible to anyone with any printer. Multi-Color Without AMS: Infinity Stones are separated from the main body, allowing you to print every part directly in its correct color—even without an automatic material system!  I printed the finger structure in PLA Silk, but if you want the fingers to be slightly articulated and flexible so they can move, you can print them in TPU Silk! If you choose to print in TPU, preferably print the entire structure as a single piece, or use custom sections by taking advantage of the available STL files. ⚙️ Assembly  By following the instructions in the uploaded GIF, you can see how to assemble the entire project just like I did and achieve a fantastic result!     As shown in the assembly GIF, the main pieces are joined after printing. You can simply use glue, but for a stronger, permanent bond, plastic welding from the inside with a soldering iron is recommended.   Just like all my previous projects, this model uses standard 8x2 mm round magnets to snap the Infinity Stones securely into the gauntlet. You will need a total of 14 magnets, installed following the steps demonstrated in the video guide.   Maximum Freedom: If you prefer not to use magnets, you can always simply glue the stones permanently in place.   All of this makes this project a true masterpiece. Happy printing!😄✌️     — GB - Check out my profile for more projects!