Angry Treant Dice Tower & 25 Dice Holder

The Angry Treant combines a working dice tower with branch holders for 25 dice. Its twisting limbs, deeply textured bark, exposed roots, and grumpy expression make it a fantasy centerpiece for your gaming table.   HOW IT WORKS Drop your dice into the opening at the top of the trunk. They travel through the hollow interior and roll out through the tree’s mouth onto the front ramp. Between rolls, display your dice in the cupped branches. Printed and tested successfully—the dice passage works smoothly, and the branches hold 25 dice. Dice fit will vary with their size and shape.   PRINT DETAILS • Printed on a Bambu Lab A1 • 0.4 mm nozzle • 0.20 mm layer height • 2 walls • 10% gyroid infill • Automatic tree supports, build plate only • Support critical regions only • 30° support threshold • Approximately 349 g of filament, including supports • Estimated print time: 17 hours 43 minutes Finished dimensions at full size: 252.6 × 237.1 × 248.9 mm Approximately 9.94 × 9.34 × 9.80 inches Use the included print profile to match the settings used for the photographed print. Remove supports carefully around the slender branches and pointed tips. Scaling down will also reduce the dice holders and internal passage. Dice shown in the photos are for demonstration and are not included in the model. If you print one, I’d love to see your color choices! Please share a photo of your finished tree.