Pokemon #231 - Phanpy Kit Card

Bring the magic of Pokémon to life with this Phanpy kit card!   This model prints flat and transforms into a fully assembled ~70mm display figurine of Phanpy that can stand on its own. Simply print, pop the pieces out, and assemble.   Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 9 pieces. The small connectors are all throwaways While similar looking the head and body connector differ in slot count. The head has 5 slots, while the body has 3. Each of the connectors has a "B" on the side that should point towards the tail. Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below, though hopefully most pieces are self explanatory!