Custom Astronaut VR Headset Stand - Universal!

Astronaut VR Headset Stand! Do you have an awesome VR Headset but have no awesome way to display it?? Well, here is an awesome “Universal”* VR headset stand just for you!  This awesome astronaut is ready to hold onto your headset until you need it again! The stand is fairly “universal” and I suspect will fit just about any VR headset. There is a set of hooks on the back of the helmet that the headband straps clip under allowing the headset to stay securely in place.  The controller hole opening is approximately 1.75" (44mm) in diameter and has been confirmed to fit the recent Meta Quest 3 controllers, as well as an older style Quest that I have at the house. I suspect it should fit just about any controller set out there as they are all made to be gripped in the hand.      Please note that the model is quite large, and takes quite a bit of filament and time to print. There is also some assembly required (glue) to put all the pieces together. PLEASE NOTE before gluing the arms into place I recommend placing the VR headset onto the helmet so that you can make minor depth adjustments of where the hands end up so that the side of the headset isn't too tight/loose against the hands.    Printed in a flat/matte whie color, keep it as -is , or go crazy with your airbrush to give it even more character!      For the folks who want a slightly less bulky base, I am in the finishing process of adding a smaller, Oval shaped base, which will also come with a small back-pack Add-On in order to store the controllers on the back of the astronaut. If you are interested in the this file it should be uploaded tomorrow after the test printing is completed.