Splash Tumbler - Prank Watergun

The Splash Tumbler is here! 💦 Prank Water-pistol Take the lid off your Stanley Cup, screw on the unit, and let the water battle begin!  Perfect for pranks, water fights, and surprising your friends! Features: Designed to fit many ordinary 40oz/1,2l cups  (I personally used the one from the Maker Supply Store) Thumb Trigger – Shoot using the thumb trigger Angled Outlet – Hold the handle with one hand, allowing you to shoot comfortably straight ahead Easy to print with no supports Super easy assembly Uses the Water Gun Kit 2 from Maker Supply No additional hardware required Huge thermal cup water tank Easy to refill Battery compartment with a cover for quick and easy charging Optional Distances to set rotation angle Boost MeThank you for supporting me😀Assembly: Assembly Short You need only the electric Water Spray Kit 2 Distance to set the angle: To ensure the trigger is perfectly aligned with the handle when the unit is fully tightened, you can use the “distance ring” The distance is on plate 2 and can be scaled in Z direction to fine-tune the angle and achieve the perfect alignment. Here’s a little tip to help with the adjustment: the thread has a 5 mm pitch and is 2-start, meaning the unit can be screwed in at a 180° offset. So, if you are missing 90°, you can print a ring with a height of 1.25 mm, which should give you the exact angle you need.   Have fun printing and, of course, having some fun with it! 💦😄   And @Makim, if you decide to award this idea and its execution with a prize in your contest , please keep the Makerworld Points for yourself. You’ve earned every single one of them! love your work❤️   You want to sell printed parts from my designs? Commercial license you get at my Makerworld profile or on Patreon: https://www.patreon.com/BamBamDesign/