MOOSWACHT – Modular Fantasy Timber House

🏡 A small house with plenty of character. MOOSWACHT combines detailed stonework, classic timber framing, decorative windows, a two-part shingle roof, an open porch, a tall chimney and an accessible interior with a loft staircase. 🧩 OPEN IT – DON'T GLUE IT SHUT The model is designed to remain modular and accessible. The roof halves, roof ridge, chimney cap, eave ring and floor section are all dry-fitted. To open the house: Remove the roof ridge. Remove the chimney cap. Carefully lift the roof halves outward and upward at an angle. The included illustrated English assembly guide explains how to access the individual floors. 🖨️ THREE PREPARED PRINT PROJECTS • Bambu Lab P2S: 8 model plates + 2 separate fit-test plates • Bambu Lab A2L: 5 model plates + 2 separate fit-test plates • Bambu Lab A1: 8 model plates + 2 separate fit-test plates Choose one complete project for your printer. All plates are separated by color, so there are no color changes required within the model plates. Print the two small fit-test plates first. They are intentionally separate so you can verify the tolerances before printing the complete house. ⚙️ RECOMMENDED PRINT SETTINGS • 0.4 mm nozzle • 0.16 mm layer height • PLA Matte • Textured PEI build plate • 3 walls • 12% Gyroid infill • 5 top layers • 4 bottom layers • Supports disabled All parts are already arranged in their intended print orientation. The layouts use approximately 6 mm spacing between part bounding boxes and at least 10 mm clearance from the build plate edge, keeping the plates compact and organized. No AMS color changes are required within the model plates. When sending a plate to the printer, simply assign the active color to the filament spool you actually loaded. 🎨 FOUR COLORS – MIX THEM YOUR WAY Project colors: • Bambu PLA Matte Ash Grey – 11102 • Bambu PLA Matte Dark Brown – 11801 • Bambu PLA Matte Ivory White – 11100 • Bambu PLA Matte Dark Green – 11501 The photos show my already printed version with a blue roof and lighter brown timber framing. This is an alternative color scheme and does not represent an exact guarantee of the filament products used in the photos. If you prefer a blue roof, simply change Slot 4 accordingly and re-slice the editable project. Always match the filament and material profile to the spool you are actually using. 📐 APPROX. 218 × 150 × 211 MM ASSEMBLED Included: • 36 house parts • 2 fit-test parts • Individual STL files • Bambu Studio project files • Illustrated English assembly guide MOOSWACHT works well as a decorative fantasy house, medieval building, diorama centerpiece or terrain piece. The model was not designed around one specific tabletop scale, giving you more freedom when using it in your own projects. 🔧 GLUE ONLY WHERE NEEDED Cyanoacrylate super glue was used for the pictured build. For easier and more controlled application, a gel-style cyanoacrylate glue can also be used, such as Pattex Ultra Gel Matic. Use only tiny amounts of glue: • Behind door and window inserts • Between matching white plaster panels and brown timber-frame sections DO NOT glue: • Floor connections • Floor section • Wall tabs • Eave ring • Roof guides • Roof ridge • Chimney connection 80/81 • Removable staircase The assembly guide identifies the relevant part combinations. Allow glued subassemblies to cure separately before installing them. For your specific PLA filament, always test the adhesive on a scrap piece first. 📷 PRINT & IMAGE INFORMATION The house shown in the photos was printed and assembled by the creator using cyanoacrylate glue. The new printer profiles and plate layouts have been digitally checked, but they have not been separately physically test-printed on all three printer configurations. The two main listing images are AI-edited layouts based on my own physical print photographs. Unedited photographs of the actual printed model are also included in the gallery. 🌿 Have fun building MOOSWACHT! I'd love to see your Make and your own color combination.