Parametric Spacer for Sofas, Beds, etc.

This parametric spacer is designed to keep sofas, beds, benches and other furniture from sliding towards the wall when sitting down.  The spacer features 9 adjustable parameters to fit different furniture and baseboard configurations, while the distance from the wall can be freely adjusted. Depending on the shape of the baseboard, a clearance can also be configured to ensure a proper fit. For larger spacers that exceed the size of the print bed, there is an additional two-piece version. The two parts can simply be connected after printing. A simple solution that can be adapted to different furniture and room setups.   Print profiles:   Both print profiles are just examples. A one-piece example and a two-piece example. One-piece is standard. You can use the two-piece variant if the spacer is bigger then your print bed. Please click on “customize” and use the generator.   Customize instruction: Dimension A: Depth of the wall side Dimension B: Distance from furniture to wall Dimension C:  Furniture leg width (add 2-3mm) Dimension D: Furniture leg depth (add 2-3mm) Dimension E: Width of the wall side Dimension F: Height of the furniture side Dimension G: Cutout depth (Set to 0,01mm if you don't need a cutout. At least 5mm less then Dim A) Dimension H: Cutout height (At least 5mm less then Dim I) Dimension I: Height of the wall side (Same as Dim F = No step)   Print settings: 4 Walls Support is needed if you configure a cutout. Please use these settings: