Mirabel Madrigal

Mirabel Madrigal   A perfect gift for Disney fans or for your desk or shelf, a delicate Mirabel inspired fan-art figurine from Encanto. She is smart, brave, and ready to do anything to capture the magic of her family. This figurine captures her expressive face, unique dress sense, Iconic glasses and fun demeanour. Ideal for display as a delicate and decorative piece, brought to life with care and attention to detail.   Printed in parts so NO AMS needed to capture that movie fun, however I have included a profile for the TOP ONLY AMS, which will allow that black and white effect for the top. The peices would have been very hard to print properly and reliably. A touch of glue and time is all she actually requires.   📌 Recommended printing settings: Material: PLA Layer height: 0.16 mm Infill: 15% - (10% for the skirt) Nozzle: 0.4mm supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal   Assembly – Recommended Method on multipart models Dry fit: Assemble all parts without glue to check alignment and fit. Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together. Optional fix: Use glue for permanent assembly.