iPhone Duo folding mockup

I wanted to know how the iPhone Duo would feel in hand, so I made a folding version you can print. The dimensions and placement are from the official sources, after the Apple event, not leaks or guesses.   It opens flat and folds closed, with interlocking hinge fingers along the spine and a raised camera bump on the back. The hinge prints fully assembled. No separate pins, screws, or glue. Sorry, I don't have the Apple engineering genius to make a print-in-place flat hinge.   Use it to try the shape in your hand, check the pocket fit, or decide whether a folding phone this size appeals to you.   ⚠️ the previous profile had an error: it was about 2.25mm too narrow when folded. The new profile with the hinge stop is the correct dimensions.   If you have issues with the hinge, that's on you. The hinge is print-in-place with somewhat tight tolerances (0.2mm and 0.25 are the major ones, required so the hinge stops as flat as it can). You can see in the video that mine hinges freely. You might need to gently ‘crack’ the hinge when it comes off the plate. Boost MeIf this model helped you decide if the iPhone Duo was for you (or not!) throw me a boost! It's way cheaper than buying an iPhone Duo :D