Real Madrid Folding Door Display Box

Real Madrid Folding Door Display Box Hala Madrid!! Elevate your display with true European royalty!  The collection heads to Spain with a tribute to Los Blancos. Blending pristine white geometry with regal gold accents, this model uses my segmented folding door mechanism to give your collection a premium, stadium-worthy presence. Which sports team would you like to see in the lineup next?   Features LED Compatible: Alternative base for LED Lamp Kit 001 to give your bottle a golden glow.                                 It also has a cutout in the top (ø65mm) to fit an LED to light up the bottle from above. Magnetic Snap: Use 8x2mm magnets to provide a satisfying, secure "click" when closing the doors. Assembly guide : Follow the detailed assembly guide below. Internal dimensions: 91x91x320mm  Technical Specifications : ComponentQuantityNotesBase1Standard or LED-compatibleTop1LED-compatiblePins2For parts 31 and 32Back Parts15 Door Parts30 Hardware Required : Steel Rods: 2 pcs (ø6mm x 350mm long) Magnets: 30 pcs Round 8x2mm (Required for door closure) Max strength N35 Adhesive: CA Glue (Superglue) for magnets and final assembly. Lighting: Optional LED Lamp Kit 001 / KC007 or similar Filament : I used Bambu labs filament for this project.   Want it to look exactly like the photos? Use these filaments :  Bambu Lab PLA Basic Blue  Bambu Lab  PLA Basic Yellow  Bambu Lab PLA Jade white Bambu Lab PLA Basic Red Assembly Tips Alignment: Ensure your steel rods are clean and straight for the smoothest door rotation. Supports :  Make sure all the supports are removed before assembly. Magnets : Be sure to orient the polarity of the magnets under assembly. Rod length : Before gluing the top on, double check that the rods aren't to long. Tolerance : Printers and filaments can behave differently. In rare cases, the holes can be a bit to tight because of settings.   If this happens, i recommend using a drill with a 6mm drill bit. Just run it through the hole a few times and you should be fine.    You can find the steel rods you need here  →   (affiliate link) If Bambu i out of stock, Led lamp kit 001 alternative → (affiliate link) If Bambu i out of stock, KC007 alternative → (affiliate link) 8X2mm Magnets → (affiliate link)    One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below. Each individual part is marked with a number, making it very easy to assemble. Good Luck with the build.