A life of dolly - Hueforge

Life of Dolly - Still not over this one! Dolly was a worldly treasure with so many accomplishments in life!  Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm IF YOU WISH TO SCALE, PLEASE DO NOT CHANGE Z HEIGHT PLEASE NOTE: IF YOU GET A WARNING NOTIFICATION FOR FLOATING, PLEASE IGNORE SUPPORTS ARE NOT REQUIRED WITH HUEFORGE The Model is 190x190mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.6mm and the Actual Thickness is 1.24mm     #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1     #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8 This print uses 2 unique filaments Swap Instructions:     Start with Black     At layer #11 (0.6mm) swap to White for the rest.