Saitama – Articulated Action Figure

"I'm just a hero for fun." Bring the strongest hero to your collection with this fully articulated 3D printable figure of Saitama from One Punch Man . Captured in his iconic, unbothered stance, this model is designed for fans and collectors who want to display the Caped Baldy on their shelf. 📝 Have a character recommendation? Fill out the Google Form in my bio—I'm always looking for new ideas! Key Features: Fully Articulated: Ball-jointed shoulders, elbows, wrists, hips, knees, and ankles allow for a wide range of dynamic poses . The neck and torso also feature articulation for expressive combat stances. Anime-Accurate Design: Sculpted to reflect Saitama's signature look, featuring his bald head, yellow hero suit, red gloves, and flowing white cape . Compact Scale: Stands at approximately 14-15 cm tall when assembled—matching the scale of other figures in this series . Includes Multiple Hands: Comes with multiple hand options including relaxed hands and fists for various posing possibilities . Snap-Fit Assembly: Parts connect with integrated pins and sockets. Please note: Due to the high detail and tight tolerances of this remix, some parts may have a very snug fit. ⚠️ IMPORTANT: A CHALLENGING BUILD ⚠️ This is not a beginner-friendly model. It is a complex remix designed for experienced makers who enjoy a challenge. The inclusion of the cape and tight joints make this an especially intricate build. Please be prepared for the following: Difficult Fit: The suit details, joints, and cape are designed to fit closely. Expect a tight, sometimes frustrating fit. Be patient and persistent. Reprints are Likely: Some parts, especially joint pins and connection points, may need to be reprinted to achieve the perfect fit. Do not be discouraged if your first attempt is not perfect. Multiple Test Fits: You will need to test-fit parts multiple times, sanding or heating connections slightly to get everything to work together smoothly. High Detail: The model features fine details (suit texture, cape folds, facial features) that require careful printing and handling . Printing Notes: Supports Required: Due to overhanging parts (especially the head and cape), supports will be needed for a successful print. Enable supports in your slicer. Recommended Layer Height: 0.10mm – 0.16mm for the best detail on the face, suit, and cape. Recommended Material: PETG is recommended for greater strength and durability, especially for joints that will be moved frequently. PLA also works but may wear out faster with use . Infill: 15–20% for body parts; 100% for small joint pins if printing them separately . Assembly: A PDF tutorial is included in the download with step-by-step assembly instructions for the figure. Warm the receiving holes slightly with a hair dryer if joints feel too tight. Move each joint carefully after assembly to break in the articulation. For FDM prints, gently sand the joints until you achieve a proper fit. Do not force parts—if something doesn't fit, reprint or carefully sand the offending area. What's Included in the Download: Complete STL set for the articulated figure Multiple hand options (relaxed hands, fists) PDF assembly tutorial Scale: ~14-15 cm (5.5-6 inches) tall when assembled. While you can scale the model, note that scaling down may reduce joint mobility and make the tight fits even worse. Post-Painting Friendly: The model is not split into color zones, so it prints as a single-color model—perfect for painting Saitama's yellow suit, red gloves, white cape, and skin with your own custom finishes . Disclaimer: This is a fan-made artistic tribute. All rights to the character belong to ONE, Yusuke Murata, and associated licensors. For personal use only.