Hexagon Screw Fidget Toy (Print in Place)

This hexagon screw fidget toy turns a simple nut and bolt into something you won't want to put down. Instead of traditional threads, the shank is a rounded hexagon profile twisted into a spiral, so it screws through the matching hexagon nut base with almost no resistance, gliding up and down in one smooth motion that's extremely satisfying every single time. The soft hex edges give your fingers plenty to grab onto as it spins, and the rounded hex nut and flanged cap on top give it a bold, mechanical look from every angle. It's fully print-in-place, so it comes off the build plate ready to twist with no assembly and no supports. At only 12.62 grams and 36 minutes of print time, this is the perfect fidget for anyone who loves smooth motion, clean mechanical designs, and a quick print that feels great in the hand. Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!xPrinting Instructions: Prepare the Print BedClean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion. Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.   Download the Print ProfileSend the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.   Select Your Printing OptionsChoose your filament type and color. Select your print bed type (e.g., textured or smooth). Confirm your printer settings, ideally for a Bambu Lab printer.   Start PrintingBegin the print job. No supports are necessary.