Mini Bat Tea Light

Light up your Halloween with this cute little Bat Tea Light Lantern – a quick and fun print with just the right amount of spooky charm. This lantern can be printed with or without supports. It fits standard electric tea lights with a diameter of up to 40mm and heights between 17–27mm (without flame). The parts simply click or screw together. Depending on your printer and extrusion, a small amount of glue may be needed for a secure fit.   Disclaimer: This design can only be used with electric tea lights. Do not use real candles.     If you are looking for the stand from the photos, you can find it here: https://makerworld.com/en/models/3230452     Print Settings My provided profiles are always ready to print.   If you want to slice the files yourself, I recommend printing it with 0.16mm, as this is required for the threads and self supported regions.     Assembly Assembly is quick and easy and should only take about a minute.   If you printed the version without supports, first click the wings into the body. Make sure to support the body from the inside with your finger while doing so to avoid breaking the shell. If required, use a tiny bit of superglue for a more secure fit. Now take the two base pieces and click them together as shown in the photo. Place an electric tea light inside and secure it with the threaded holder. Finally, screw the base into the body and you're done!     Like this design? Check out my Halloween Collection! https://makerworld.com/en/collections/2376084-halloween-decoration Commercial license available on Patreon and MakerWorld!