Rugged Stand - Phones Tablets - Gridfinity Enabled

Rugged Stand with or without Gridfinity Base A sturdy phone and tablet / iPad stand with a diamond-lattice “rugged” front lip and a Gridfinity-compatible base so it drops into your modular desk setup. The front bumper uses an open diamond grid for, ventilation, and a premium look. The tablet sits in a shallow channel at a comfortable viewing angle. The underside follows the standard 42 mm Gridfinity grid so the stand locks onto a baseplate (magnets optional) or can sit standalone on a desk. Features Landscape viewing stand for 10–13" tablets (iPad Air / Pro 11" and similar; thicker cases may still fit depending on slot depth) Distinctive diamond lattice front lip — extra grip, less slippery than a smooth plastic edge Gridfinity base (designed around a multi-unit footprint so it is stable with a full-size tablet) Optional 6 × 2 mm magnet in the Gridfinity cells Clean, print-friendly geometry — no tiny unsupported features on the visible faces Works as a dedicated stand or as part of a larger Gridfinity desk / charging layout Suggested print settings Material: PETG or PLA Layer height: 0.2 mm Walls: 2-3 Infill: 15–20% gyroid or grid Supports: Usually none if printed with the base flat on the bed; add light supports only if your slicer flags the lattice or lip Orientation: Base down Optional: Slow outer walls on the lattice for a cleaner diamond pattern