Finger Scooter - Street Edition

Finger Scooter - Street Edition is a redesigned street-style version of my original Finger Scooter, featuring a wider deck, classic T-bar, reinforced neck area and several visual updates.   The new parts keep the same modular concept and remain largely compatible with the original Finger Scooter.   Assembly Most joints use short pieces of the same 1.75 mm filament you print with as pins. Push the filament through the aligned holes and trim the excess.   The pin holes are intentionally tight to compensate for PLA creep over time. If a pin is difficult to insert, gently widen the hole with a screwdriver.   The deck grip should be glued to the deck. Handlebar grips are designed for a tight fit, but you can glue them in place if needed.   Designed and tested for PLA.   Print Profiles Three profiles are included: Print by Object - best option for printing all required parts in their intended colors. Requires AMS. If you cannot see this profile, select All in the printer filter - you may need to adapt the profile to your printer. Split by Plate - parts are grouped by color on separate plates. Suitable for printing without AMS, either in different colors or a single color. All in One - all parts arranged on a single plate for a quick one-color print. The profile includes two plates with different deck options: one with a separate grip piece to glue on, and one solid deck without a grip. All Parts - all parts are available on separate plates, so you can freely mix and build your own setup. Instructions A PDF assembly guide generated in Bambu Studio is included in the model attachments.   Additional assembly materials will be added soon.     Boost MeLike the Street Edition? Drop a Boost and help keep the scooter project rolling! I’ve got more parts, styles and upgrades in mind - a Boost is the best way to show you’d like to see more. 🛴✨