Halloween spooky house advent calendar

All the calendars that we have upload use the same drawers for 1-24. There are both for Christmas and for Halloween calendars now so you can swap them. Get ready for Halloween with this spooky house advent calendar, designed and 3D printed from scratch. The calendar features 31 numbered drawers, giving you a fun countdown from 1 to 31. Each drawer is perfect for hiding small gifts, candies, treats, or little Halloween surprises. The model is designed as a multi-part assembly, making it possible to print the different elements separately and put everything together easily. A small amount of glue is used to secure the parts during assembly. Fill the drawers with your favorite Halloween surprises and create your own spooky countdown! If you enjoy the model, please consider sharing a photo of your print. I would love to see how your Halloween house turns out.   About the model: Can be printed without ams Can be printed in A1 mini Can be printed without supports. some of you maybe want to use supports for the drawers though The image below is a drawer printed without supports. If you are uncomfortable with that, slice the drawers with your supports. i prefer a little air heat and fix with finger there. No external hardware is needed to assembly the calendar. Only glue for assembly. the drawers are 36x28x29mm internal dimensions without scaling it. remember that if you have a 255x255 plate you can resize the whole project at 140%. This means that you can go up to 50x38x41mm! You can print all the 24 drawers without scaling them on a single plate too if you want to be the same color. All the drawers can fit in a plate A1 mini also. Total size after assembly: 270mm x 240 mm x 67mm There is a hole on the back for wall mounting also:     About the profile: the profile uses an ams for the drawers but if you dont have one please add a pause at layer 143 for the square drawers  and at layer 147 for the window drawers.:   There are 12 plates in total , 5 for the body, 2 for the wall parts and 5 for the drawers.   Used Hilbert curve for the top surface of the drawers only with a modifier. You can change this if you wish though.       total time is about 24 hours and total filament needed around 1000 grams:     Feel free to resize it if you have bigger build plates. Waiting a feedback for this if someone decide to do it. Feel free to use your colors. Easy Assembly: You can watch the assembly in video on you tube here: Glue the walls on the house bodies: Glue the fires on the torches and glue them on the walls of the house entrance where the reliefs are: Glue all the house bodies together: Glue the chimney on the relief on the right roof. Finally remove the supports of the window and door drawers and place all the drawers accordingly. Now you ready to put the drawers with some gifts inside. I have uploaded some Halloween minis for that purpose if you wish you can check them here: https://makerworld.com/en/models/3105204   added them on our Halloween collection here: https://makerworld.com/en/collections/24881506   Also added in the drawers and boxes collection: https://makerworld.com/en/collections/16782218   Note that there is a watermark from behind. this is the least i can do protect the design. i see a lot of online stores to sell some of my models and i cant keep in track. If you have already commercial license please ask me to send you the model without watermark if you u wish.