SPRING BONNIE articulated figure #EndoEdition

PLEASE READ: This model is seperated into several plates, some for the suit pieces, and some for the endoskeleton inside (Refer to this attatched video for assembly guide: Assembly guide )    NOTE: The shoulder pads are attatched by a rather fragile connector, allowing them to be flexible, but they can break when removing them from the build plate, so be gentle!   This is a model of SPRINGBONNIE from popular indie horror game FNAF! Its a fully articulating figure that comes together easily with just a few ball joints (Refer to attatched video for assembly guide) . Its outer covering is removable to reveal whats inside! The print time is roughly 5 hours for without AMS, and 20 hours with AMS (will take longer to print the extra accessories).   This is ENDO EDITION,  and this model is the latest in my  series of action figures, heavily inspired by the endo series toy line by Jazwares. These models include an “endoskeleton” as well as an accompanying armour to bring the FNAF character to life! This gimmick not only makes these figures extra customizable, but also helps reduce print time, increase tolerance and remove the need for sanding as every part is in its optimal orientation for printing.    Feel free to change or add to this model as long as you credit me too 🤩 🙏. If your are intersted in the other articulated  FNAF  figurines, you can check out my other designs here!    FNAF 2: https://makerworld.com/en/collections/26858668-fnaf-2   Endo Edition: https://makerworld.com/en/collections/30052281-endo-edition