Parametric Forward Facing Magazine Carriers

AuxArc presents Forward Facing Magazine Carriers with option for Magnet attachment. Boost MeThis item is due to requests from you guys!  Appreciate the supports and the boosts!  This is a parametric doublestack magazine carrier that points bullets forward, allowing for faster reloads (theoretically) by lining the magazine optimally for reloads.  The default print is for Glock Doublstacks but can be tweaked for most doublestack magazines.  It integrates with my already existing magazine carrier belt mounts and would not require new ones.       The angle of the carrier can be adjusted by the spacer that is used to mount the carrier to the belt.  This uses a ¼=20 socket head screw into a nut recessed in the carrier.  Loose then, adjust angle using the notches and tight again.       There are two versions of the carrier, one is normal and the other has an attachment point for a magnet.  I used a regular 25lb magnet from ACE Hardware but anything like this will work.  Use #8-32 hardward to mount, probably ¼" screw and a nylock or regular nut.     This item is a direct request from you guys, both the bullets forward and the magnet, and I appreciate the comments, critiques, boosts and questions.  Thank you.   9/3/26 UPDATE: Had the wrong spacer piece in there and it was too thick to set in the belt attachment.  That's been corrected, my apologies.       Full video on operation and testing here: