Adjustable Book Display + customizable title

The only Book Display you'll ever need: fully adjustable to your bookshelf size (~7-40mm, BILLY, KALLAX) and book thickness (up to 65mm). Additionally, you can decorate it with a title of your choice. Here is the tool to generate the title sign & download the adapter on Maker World.  Print Settings (included in the 3mf):  • General: 0.16 mm layer height, 5% Gyroid Infill  • Book Display: Normal Supports & Support Blocker for the pattern  • Screw, Head & Slider: No Supports, Large Brim recommended    Support Removal Tip: Clip off one side, then pull out the rest from the other side.    Assembly:  1. Put the screw in 2. Stick the screw head on the screw  3. Put the slider inside the book display until you feel resistance (only one way is correct). Apply pressure to push the slider in for the first time until the stoppers click into place. This prevents the slider from falling back out.  Filament used: Bambu PLA Basic Black. Not tested with matte/wood filaments yet. These might not work for the “slide in” mechanism.  License: You’re allowed to sell physical prints of this model if you have an active paid subscription to my Patreon (Tier: 3D Print Seller). Happy printing! ♥