Portable Offline Internet - 3U Homelab In A Case

This is a portable, self-contained network and server designed to provide access to useful information and services when there’s no internet connection available - my build is powered by Project Nomad.    The case allows for a 3U 10" homelab to be built into it, which can then be closed up to carry around in a protective case.    The full build, parts list and assembly guide is documented on my blog and in my Youtube video.   Important: The case body and lid require a fair amount of support material. It is significantly easier to remove these if you use the Bambulab Support for PLA/PETG filament at the interfaces. Because of the model dimensions, you can't use the dual heads on the H2D or H2C, you have to use either the left or right extruder. Because of this, I haven't included support filament in the default model as it is a bit confusing to use two filaments with a single nozzle on these printers, the slicer generates a few warnings. You can add the support filament in manually, but add them both to a single AMS and print in Convenience Mode.   Note: I have removed the Project Nomad logo and branding from the print as I don't have permission to copy or distribute these. If you'd like the logo on your build, you'll need to add it in using the SVG tool in the slicer. Basic Hardware Required Beelink SER 9 Max - Buy Here Uperfect GR14BU 14" 3K OLED Display - Buy Here 10G QNAP Network Switch - Buy Here GLiNet Slate 7 Router - Buy Here Ethernet Keystone Jacks - Buy Here HDMI Keystone Jacks - Buy Here  Network Patch Leads - Buy Here  Noctua NF-A4x10 Fan - Buy Here  M6x10mm Button Head Screws - Buy Here  M6 Brass Inserts 8mm OD, 5mm Length - Buy Here  M3 x 8mm Button Head Screws - Buy Here  M3 Brass inserts OD 4-5mm - Buy Here