Whale Clicker (No AMS)

🐋 Whale Clicker Meet the Whale Clicker, a cute and simple whale-shaped fidget clicker designed for 3D printing. Press the whale's side button to enjoy a satisfying mechanical click. The rounded whale body, playful water spout, small fins, and pearl-style keychain make it both a fun clicker and a cute everyday accessory. The model is designed to be printed in separate color parts, so you can create your own color combinations without needing an AMS or other multi-color printing system. ✨ Features Cute whale-inspired clicker design Satisfying mechanical clicking action Designed for 1 × MX mechanical key switch Keychain-friendly design with a pearl-style ball chain Separate parts for easy color customization No AMS required Simple assembly after printing Suitable for PLA and similar commonly used 3D printing materials 🖨️ Printing Support is required for some parts of the model. The provided print profile already includes recommended support settings, so using the included profile is highly recommended for the best printing results. For a cleaner surface and easier support removal, using a different support filament/material is recommended. Recommended approach: Use the provided print profile whenever possible. Enable the support settings included in the profile. Use a different support material for cleaner support interfaces if available. Carefully remove the supports after printing. 🔧 Required Parts You will need: 1 × MX mechanical key switch 1 × pearl-style ball chain for the keychain function No AMS or other multi-color printing equipment is required. 🎨 Color Assembly The Whale Clicker is designed as a multi-part, color-assembled model. Each part can be printed separately in different colors and assembled afterward. This allows you to create colorful versions using a standard single-color 3D printer. You can freely experiment with combinations such as: Blue + White Pink + White Mint + White Lavender + White Yellow + White The colors shown in the photos are examples only. 🧩 Assembly Print all required parts. Remove the supports carefully. Install one MX mechanical key switch into the clicker mechanism. Assemble the printed parts according to the model structure. Attach the ball chain to the tail. Press the button and enjoy your Whale Clicker! ⚠️ Notes Printing results may vary depending on your printer, filament, and slicer settings. Support removal should be performed carefully to avoid damaging small parts. Make sure the MX switch is properly seated before final assembly. The model does not require AMS or multi-color printing because the different colors are assembled from separately printed parts. Have fun creating your own colorful Whale Clicker! 🐋   If you like this model... ❤️ Please leave a Like! ⭐ Your Rating is greatly appreciated. ➕ Follow my profile for more fun and useful 3D printable designs.