Battery Box - DOUBLE - AA/AAA/9V

Battery Box - DOUBLE - AA / AAA / 9V — Built with BoxLoc Built on the same BoxLoc foundation as the Ammo Box lineup, this Battery Box variant brings that familiar design into everyday battery storage. It uses the same lid, latch, and base components, keeping everything consistent while adapting the interior for a more flexible, mixed-use setup.   In this second DOUBLE release, it supports AA, AAA, and 9V batteries through a range of interchangeable inserts, making it easy to organize a single type or mix and match as needed. Swappable labeled latches keep everything clearly marked, so you can identify contents at a glance. Additional inserts planned for future releases.   The design carries forward the same refined details found across the BoxLoc system — smooth rounded edges, a secure sliding hinge, and a crisp latch with an integrated finger lip for confident handling.   Double Insert capacities: AA - x70 AAA - x119 9v - x32   Highlights - Double Edition AA, AAA, and 9V battery support Interchangeable double sized insert options (AA, AAA, 9V) Additional single sized inserts can be used from the original battery box Swappable labeled latches for quick identification Removable inserts for easy loading and organization Rounded edges for comfort and clean presentation Refined rear hinge for smooth, secure motion Crisp latch with integrated finger lip Stands on multiple sides for flexible storage Hardware-free assembly — no tools, screws, or glue needed Built on the BoxLoc platform — shared components with Ammo Boxes for consistency   Assembly Instructions Join the lid and baseAlign the lid’s hinge tabs with the grooves on the bottom of the base. Gently slide the lid upward into the hinge slots. Once you feel resistance, wiggle the hinge slightly along the pivot joint as you move it upward to help it seat properly. Double version - Because it includes an additional hinge set, you may need to work each hinge section individually, guiding them upward one at a time, a little at a time, to prevent binding or potential breakage. Continue until the lid clicks securely into place and pivots smoothly. Attach the front latchPosition the latch so the rounded side inserts into the lid at a slight angle. Lightly squeeze the top of the latch to help it pop into place. Make sure the flat side faces outward, so the finger lip curves toward the box. While the latch will technically fit either way, this orientation provides the best comfort and clearance when opening or closing. Ammo Tray InstallationPlace the insert tray into the box and press firmly down on all four corners to lock the legs into place. You’ll know it’s fully seated when you hear it the corners click into place. Ammo Tray RemovalRemove one round from a corner, then insert the end of a pencil (or similar tool) into the empty hole to gently pry the tray upward at an angle. Once it starts to lift, you can continue with the pencil or grab the exposed edges to fully remove the tray from the box.   NEW - Support & Commercial Use Memberships Supporter and limited commercial license memberships are now available on Patreon @ (https://patreon.com/Layer51). Boost MeLike this model?  Be sure to send a boost, so I can keep making more. Thank you for the support.