Mini Ghost Tea Light Lantern

This cute Ghost Mini Tea Light Lantern is a quick and fun print that adds a cozy spooky glow to your Halloween decorations.   No AMS or supports required for printing. It fits standard electric tea lights with a diameter of up to 40mm and heights between 17-27mm (without flame). Most parts click or screw together, you only need a little bit of glue for the black face details. Disclaimer: This design can only be used with electric tea lights. Do not use real candles.     Print Settings My provided profile is ready to print.   If you want to slice this file yourself, I recommend printing the ghost parts with 0.16mm layer height. You should also use 3 wall loops to reduce shine through in unwanted places.     Assembly Assembly only takes a few minutes. You will need a tiny bit of superglue.   Use the slots on the back to find the correct position and orientation of each face piece. The eyes have different slots (round and triangular) to distinguish left from right. Then secure each piece with a small drop of super glue. Now click the threaded connector into the bottom of the ghost, using the tiny arrow for the correct orientation. Screw in the tea light holder, click both halves together, and you’re done! The branch of the holder simply pushes into the base. If desired, you can secure it with a small drop of glue.     If you like this design, check out my Halloween Collection! https://makerworld.com/en/collections/2376084-halloween-decoration Commercial license for all my designs available on Patreon and MakerWorld!