Window Stop • Stick-On • Parametric

A simple, discreet and parametric window stop designed to keep your window open at the desired position while ventilating. The window stop is attached to the windowsill or a suitable tiled surface using double-sided adhesive tape.  The flap stays securely in the open position thanks to an integrated snap-in mechanism in the hinge.  The design is intentionally minimal and unobtrusive, so it blends into the surroundings without attracting unnecessary attention. Features Parametric – adjust the height to match the distance between your windowsill and the window. Stick-on installation – attaches with double-sided adhesive tape. Integrated hinge lock – the flap stays open thanks to a built-in snap-in mechanism. Adjustable ventilation position – use a single stopper for a fixed opening position. Multiple positions – combine two stoppers side by side to create a specific and stable opening position. Print in place - without assembly Simple and discreet design – designed to be as unobtrusive as possible.   Customize / Print Profiles Determine the required size:   There are 3 predefined sizes available:   45mm 50mm 55mm   You need a different height? Just click on customize and create your own model! Assembly Add double-sided adhesive tape on the bottom of the part. As shown in the photo, I recommend not using too much tape so that the model can come loose from the surface if you accidentally try to close the window while the stop is open.   Print Settings: 4 Walls (otherwise standard) Filament: PETG (especially when exposed to direct sunlight) PLA Basic (when the model is in the shadow)   Do you prefer a clamp variant? See also my other window stop: LINK