XTEINK X4 Pro Rugged Case

Introducing the XTEINK X4 Pro rugged case! It requires M3 threaded inserts (5mm wide threaded inserts), and 4 6mm M3 screws. The model has two variations, the STLs and “Plate 1” use the exact fit of the XTEINK X4 Pro, so the fit is very tight and will work best with PLA. If you're using ABS, ASA, or PETG, I'd suggest printing “Plate 2” in the 3MF file, which has the “Loose_” variants (sized to 100.2% of the original size, the .2% accounts for shrinkage in material).  If your printer is not finely tuned, you may need to try 100.1% sizing or the “Loose_” variants of the model within the 3MF. I am planning to make several other versions of this case, for example ones with a TPU insert, and one without screws, but this case was my first ever, so the screw design was the most approachable.  Parts needed:  M3 threaded inserts M3 x 4mm (Depth) x 5mm (Width) M3 6mm long screws Assembly guide video: