Fortnite Gold Klombo Sprite

Give your desk a legendary glow-up with this shiny Gold Klombo Sprite from Fortnite!   This variant is specially dialed in to highlight the sheen of Silk PLA. With a two-tone metallic look combining rich gold and bright yellow silk, this little companion stands out on any display shelf or gaming setup. Fully optimized for seamless multicolor printing with Bambu Lab AMS.   Recommended Print Settings Layer Height: 0.20 mm (Optimal for silk shine and minimal layer lines) Walls/Perimeters: 2 to 3 walls Infill: 10%–15% (Gyroid) Supports: Tree supports (Auto) for clean overhangs under the jaw and chin. Brim: Recommended (Outer Brim Only, 5mm) for extra bed contact on the feet. Color / AMS Mapping Slot 1 (Main Body): Gold Silk PLA Slot 2 (Belly, Jaw, Hands): Light Yellow Silk PLA Slot 3 (Eye Accents): Silk / Basic Blue Slot 4 (Pupils): Basic Black Slot 5 (Pupil Spec): White For a 4-color AMS setup, you can either print the body entirely in one gold shade or paint the eye glints white for extra detail.    Printing Tips Print Silk PLA slightly hotter (typically 220°C–225°C depending on your brand) and at lower speeds to achieve that ultra-glossy finish. Ensure your textured or smooth plate is thoroughly cleaned for perfect first-layer adhesion. If you print one, please share your makes and drop a rating—I’d love to see your glossy gold prints!