EZ-Z Luber for Lucas White Grease

The EZ-Z Luber for Lucas White Grease is an EaZy way to lubricate the Z-axis screw of your printer. This handy tool screws onto the end of the tube, allowing for precise and clean application without getting grease on your hands.   To use, simply replace the cap on the tube with the EZ-Z Luber. Straddle the sides of each Z-axis screw with the applicator and turn it clockwise. The EZ-Z Luber hugs the screw, and when you squeeze the tube, lubricant is applied directly to all sides of the screw simultaneously. Move it up and down along the screw to cover the entire length. You’ll be finished in no time.   Note: If it feels like you need to squeeze the tube too hard for the grease to come out, cut more off of the tip of the tube. But be careful to not cut into the threaded tip section.    The EZ-Z Luber was designed with a long enough neck to reach the rear z-axis of Bambu Lab's H series of printers but also works with the X and P series.     Also available is a dust and dirt cap that fits the EZ-Z Luber.