Customizable Flower Tray Generator

Customizable 3D Flower Tray Generator An enchanting, elegant, and fully parametric 3D desktop tray featuring organic interlocking 5-petal flowers, prominent spherical centers, and a smooth snag-free interior cavity.   Choose between 4 stunning tray geometries: Oval (Stadium / Capsule), Rectangular (with elegant rounded corners), Square (with rounded corners), or Round (Circular). Based on the proven Antigravity floral design, customize your exact dimensions, layer count, flower size, and color mode in seconds! Ideal for jewelry dishes, vanity organizers, perfume trays, catchalls, or stylish table centerpieces. --- QUICK START GUIDE: --- Follow these simple steps in the MakerWorld Customizer: 1. Color Mode:   Choose Dual_Color_AMS for two-color printing with highlighted gold/yellow flower centers, or Single_Color for a sleek monochromatic finish. 2. Tray Shape & Layers:   - Choose Base_Shape from:     - Oval (Stadium / Capsule)     - Rectangular (Rounded Corners)     - Square (Rounded Corners)     - Round (Circular)   - Choose Number_of_Layers: Select the number of stacked flower layers (1 to 6 layers) to define the rim height. 3. Tray Dimensions:   Set your Length (e.g. 180mm) and Width (e.g. 110mm). For Square or Round shapes, Width sets the side length or diameter. 4. Flower Border Pattern:   - Flower Size: Choose Small (~16.5mm) for a fine delicate border, Medium (~22.0mm) for balanced classic flowers, or Large (~28.5mm) for bold flowers.   - Center Style: Choose Solid_Center for rounded 3D spherical centers, or Open_Hole for open-center petals.   - Alternating Layers: Keep set to Yes for the organic interlocking brick-style pattern. 5. Interior Cavity:   Keep Smooth_Inner_Wall set to Yes for an effortless snag-free, wipe-clean interior cavity. Set to No if you want full 3D flower relief and yellow centers inside the cavity. 6. Advanced Settings:   Optional fine-tuning for Corner Radius (default 20mm for Rectangular/Square), Floor Thickness (default 3.0mm), Wall Thickness (default 2.0mm), and more. 7. Generate & Print:   Click Generate, download your 3D model, and slice! 100% Support-free and ready to print. --- RECOMMENDED TRAY PRESETS: --- - Rectangular Vanity / Desk Organizer Tray:  Shape: Rectangular | Layers: 2 | Length: 200mm | Width: 120mm | Flower: Medium (~22mm) - Square Catchall / Jewelry Dish:  Shape: Square | Layers: 2 | Width / Side: 130mm | Flower: Medium (~22mm) - Classic Oval Perfume Tray:  Shape: Oval | Layers: 2 | Length: 180mm | Width: 110mm | Flower: Medium (~22mm) - Round Ring & Trinket Dish:  Shape: Round | Layers: 1 or 2 | Width / Diameter: 110mm | Flower: Small (~16.5mm) --- RECOMMENDED PRINT SETTINGS: --- - Supports: None needed (100% Support-Free design) - Wall Generator: Arachne (Recommended for smooth variable petal curves) - Resolution / Slicing Tolerance: 0.012 mm - Arc Fitting: Disabled / Unchecked - Layer Height: 0.16mm or 0.20mm (0.16mm recommended for ultra-smooth petal curves) - Outer Wall Speed: 80 mm/s (for clean, crisp surface quality on flower petals) - Inner Wall Speed: 100 mm/s - Top Surface Speed: 80 mm/s - Internal Infill Speed: 100 mm/s - Internal Solid Infill Speed: 100 mm/s - Small Perimeters Speed: 50% - Top Shell Layers: 3 (Top Shell Thickness: 1.0 mm) - Top Surface Painting Penetration Layers: 5 - Bottom Surface Pattern: Octagram Spiral (for an elegant aesthetic bottom finish) - Sparse Infill Density: 10% (Gyroid or Grid) - Wall Loops / Perimeters: 2 or 3 - Material: PLA, Matte PLA, Silk PLA, or PETG If you like this model, please leave a like, rate 5 stars, and share your colorful prints in the comments!   Check out the full project here: Customizable Flower Pen Holder Generator