3D Printed Clicky Clicker V2 - Print in Place

Boost MeIf you like fidget clickers, I’d really appreciate a Boost! It helps support my work and motivates me to keep creating more 3D-printable models!Don’t have an MX switch to make a clicker? V2 takes the original fully 3D-printed clicker mechanism and improves it with a smoother, stronger, and more satisfying design. What’s new in V2: The top now has no holes and uses 45° overhangs, making it easier to print cleanly. The wall generator was changed to Arachne for better wall generation and print efficiency. 100% infill reduces print time while improving strength. Some parts were redesigned with circular geometry for a smoother overall experience. The first layer speed was reduced to 35% to improve first-layer adhesion and print reliability. When the spring stem rubs against the wall during the click, it produces an additional sound similar to a real mechanical click. The cross-shaped stem remains compatible with MX-style keycaps, so you can add your favorite keycap and customize your clicker. The clicker used in the video: https://makerworld.com/en/models/2294582-keyboard-clicker-fidget?from=search#profileId-2503969 Print recommendation: PETG is recommended, but PLA will also work. I recommend 0.16 mm layer height for a good balance between print quality, strength, and print time.