Pokemon #213 - Shuckle kit card

Bring the magic of Pokémon to life with this Shuckle kit card!   This model prints flat and transforms into a fully assembled ~65mm display figurine of Shuckle that can stand on its own. Simply print, pop the pieces out, and assemble. Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Given the eye whites and the wool share the same color a very light color is suggested for a better final look Assembly Notes: There are a grand total of 12 pieces. The small connectors are all throwaways The head piece includes a “B” on the side that should point towards the back The legs all have a letter on the inside facing part. “F” for the front legs, “B” for the back legs Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below should provide step by step instructions, but feel free to ask if something is not clear!