Танцующий скелет для аквариума

A skeleton on a boat! This model is designed specifically for use with an aquarium air pump. A standard aerator tube runs through or behind the structure, allowing rising air bubbles to enliven the composition and oxygenate the water. Layer height 0.12 mm (proven formula; if you are in a hurry, 0.16 / 0.2 is possible for a draft) The thickness of the walls of 2–3 contour | Filling 15–20% Supports: Disable  Orientation: suction cup stand down to the table; the partition lies separately flat Adhesion to the table: Brim 5 mm (checked, recommended for ensuring the adhesion of the first layer of the thin leg of the suction cup stand) Seam: back or random Material: for aquariums with immersion in water/with a heating lamp, PETG is recommended; PLA is only for short-term demonstration, soaking in water + temperature increase easily leads to softening and deformation. If you can control the deformation, ASA/ABS will also work.