LIFE-SIZE IT PENNYWISE THE CLOWN HORROR KING

🎈 LIFE-SIZE PENNYWISE — IT THE CLOWN THE DANCING CLOWN — HORROR DISPLAY EDITION (1000mm) Something terrifying has arrived from the sewers. 🎈🩸 Bring Pennywise, the Dancing Clown to life with this incredibly detailed 1000mm life-size display model, packed with sculpted details from the terrifying face and rows of teeth to the layered clown suit, textured base, sharp rock formations, paper boat, and signature red balloon. Designed as a 4-section modular statue with 66 total parts, this build is optimized for a 256 × 256 × 256mm print volume and uses dowel connections for strong, accurate assembly. Whether printed in clean white and painted afterward or produced as an AMS-ready multi-colour display, this is one seriously creepy centerpiece. 🎈🔥 Boost MeIts Free :D 🎈 SCALE & DIMENSIONS HEIGHT 1000mm / 1 Meter TOTAL PARTS 66 Parts MODULAR SECTIONS 4 Major Sections CUT SIZE 256 × 256 × 256mm CONNECTION SYSTEM Dowel Connected PRINT STYLE 🔥 AMS READY 🤡 THE DANCING CLOWN This Pennywise statue has been designed as a highly detailed collector-style horror display. The sculpt captures the unmistakable monstrous appearance of Pennywise, including: 🩸 Huge open-mouth expression 🦷 Individual razor-sharp teeth 👄 Deeply sculpted mouth and throat 🤡 Detailed clown facial structure 💇 Intricately sculpted clown hair 🎈 Signature balloon 👔 Layered ruffled clown costume 🔘 Detailed costume buttons 🪨 Cracked stone and rubble ⛓️ Detailed display platform 🛶 Paper boat 🎈 Complete balloon assembly The result is a 1-meter-tall horror centerpiece with an enormous amount of surface detail. 🧩 MODULAR PRINT SYSTEM The statue has been divided into 4 major modular sections: 🔴 PART 01 — BASE The complete display platform featuring: Multi-layer circular base Cracked stone flooring Rubble Large rock formations Front decorative plaque Paper boat Structural connection points The base gives Pennywise a substantial display footprint while creating the ruined, horror-themed environment around him. 🟠 PART 02 — TORSO The complete upper body assembly featuring: Clown suit Layered ruffles Shoulders Buttons Costume detailing Arms Connection points The sculpted clothing contains extensive folds, textures and layered details that will look fantastic with a combination of AMS printing and paint finishing. 🟡 PART 03 — HEAD The centerpiece of the model. The head includes: 🤡 Detailed Pennywise face 🦷 Individual teeth 👄 Giant open mouth 👅 Deep mouth interior 💇 Highly detailed hair 🎭 Facial sculpting 🩸 Monster-like interior detailing The enormous open-mouth design gives the model its signature horror appearance. 🎈 PART 04 — BALLOON The iconic Pennywise red balloon is included as its own modular component. Separating the balloon makes printing, painting and assembly considerably easier while allowing the balloon to be printed in a dedicated red filament. 🖨️ BUILD VOLUME OPTIMIZED FOR 256 × 256 × 256mm The complete 1000mm statue has been broken down so that the individual components can be produced on a 256mm-class printer. This makes the project accessible without requiring a large-format machine. The modular construction also makes it easier to: ✅ Print individual components ✅ Reprint damaged pieces ✅ Paint sections separately ✅ Transport the model ✅ Store the model ✅ Assemble the finished statue 🎨 AMS READY MULTI-COLOUR PRINTING The model is AMS READY, giving you the option to reproduce much of the visual appearance directly from the printer. 🎈 RECOMMENDED PALETTE ⚪ White / Ivory — Clown suit 🔴 Red — Balloon and blood details 🟡 Cream / Bone — Teeth 🟤 Dark Brown / Orange — Hair ⚫ Black / Dark Grey — Base and shadows 🩶 Grey / Charcoal — Rocks and stone 🩷 Pink / Flesh — Mouth and tongue For the ultimate finish, print the main components in their base colours and use airbrushing and hand painting for the final weathering. 🖨️ PRINTING RECOMMENDATIONS LAYER HEIGHT 0.12–0.16mm For the face, teeth, hair and costume details: ⭐ 0.12mm recommended WALLS 3–4 walls INFILL 5–10% Gyroid For larger structural pieces such as the base, 10–15% can be used where additional weight or strength is desirable. TOP / BOTTOM 4–5 layers 🌳 SUPPORTS Because of the extremely detailed sculpt and large number of overhangs, supports will be required on selected parts. Pay particular attention to: 🦷 Teeth 💇 Hair 🎈 Balloon support/stem 🤡 Face and mouth 👔 Ruffles 🪨 Rock formations 🛶 Paper boat 🔘 Small costume details RECOMMENDED Use tree supports wherever practical to minimize scarring and make cleanup easier. For the teeth and facial details, carefully tuned support interfaces will help preserve the sculpt. ⭐ PRINT DIFFICULTY ⭐⭐⭐⭐☆ ADVANCED This is a serious display project. The 66-part construction means you'll have a substantial number of individual pieces to print, clean, test-fit and finish. The biggest challenge areas are: Fine facial details Individual teeth Hair strands Ruffled clothing Rock formations Balloon assembly Large base components Multi-part alignment Painting and finishing The modular approach makes the project much easier to manage than a single-piece 1-meter statue. 🔩 DOWEL CONNECTOR SYSTEM The model uses dowel connections between its modular components. The dowel system provides: ✅ Precise alignment ✅ Stronger connections ✅ Easier assembly ✅ Better load distribution ✅ Cleaner seams ✅ Reduced movement between sections Always perform a dry fit before applying adhesive. 🧱 ASSEMBLY ORDER 01 — PRINT Print all 66 components. 02 — CLEAN Remove supports and carefully clean the detailed surfaces. 03 — TEST FIT Dry-fit the modular sections and dowel connections. 04 — BASE Assemble the complete display base. 05 — TORSO Build and attach the torso assembly. 06 — HEAD Install the head and verify alignment. 07 — BALLOON Attach the balloon and stem. 08 — FINAL CHECK Inspect all seams and connections. 09 — FINISH Sand, prime, paint and weather. 10 — DISPLAY Put Pennywise somewhere visitors can see him. Or somewhere they can't. 🎈 🧴 ADHESIVE RECOMMENDATIONS For smaller details: CA Glue / Super Glue For larger structural connections: Two-part epoxy For the major modular joints, epoxy is recommended when the model will remain permanently assembled. 🩸 PAINTING IDEAS 🤡 FACE Start with a pale ivory / off-white base. Add subtle grey and brown shading around the sculpted facial areas to bring out the texture. 🦷 TEETH Use: Bone / Ivory Then add a darker yellow-brown wash around the gumline and between the teeth. 🩸 MOUTH Use deep: Burgundy → Dark Red → Black Layering the colours inside the mouth will create an enormous amount of depth. 💇 HAIR Start with: Orange / Copper Then add darker red-brown shadows and bright orange highlights across the sculpted strands. 👔 CLOWN SUIT Use a weathered: Ivory / Dirty White Then add grey and brown washes into the folds. A slightly dirty finish will make the costume feel much more sinister than perfectly clean white. 🎈 BALLOON BRIGHT BLOOD RED Add darker red around the edges and subtle highlights across the surface. A glossy clear coat can make the balloon stand out dramatically against the matte costume. 🪨 BASE WEATHERING The base is perfect for a heavily weathered finish. Try: ⚫ Charcoal 🩶 Dark Grey 🟤 Brown 🔴 Dark Red 🟠 Rust tones Dry-brushing the raised stone details will make the cracked surface pop. 🎈 HORROR DISPLAY EDITION The 1000mm Pennywise is designed to be much more than a simple character print. The huge mouth. The individual teeth. The twisted clown costume. The ruined stone base. The paper boat. And, of course... 🎈 THE BALLOON. Together they create a full IT-inspired horror display scene rather than simply a statue. 🏆 LIFE-SIZE PENNYWISE — IT THE CLOWN 1000MM TALL 66 PARTS 4 MODULAR SECTIONS BASE • TORSO • HEAD • BALLOON 256 × 256 × 256MM CUT SIZE DOWEL CONNECTED AMS READY 🎈 WE ALL FLOAT DOWN HERE. 🩸 THE MAJIN LAB 🎈🔥