Waveforms #6 - Parametric Wall Art

Waveforms #6 – Parametric Wall Art Waveforms #6 is a 40x40 cm multi-layer generative topographic wall relief. Created using a hybrid workflow combining Blender Geometry Nodes for dynamic wave generation and OpenSCAD for precise layering, this model turns mathematical noise into a striking tactile piece. The design relies on a layered heightmap effect that contrasts light blue, cream, grey and charcoal filaments, giving it a vibrant topographic map aesthetic.   Model Details & Specifications Dimensions: 400 mm x 400 mm (Divided into printable sections for standard bed sizes like 256x256 mm). Layer Colours: 4 Filament colours (e.g., Powder Blue, Matte Cream, Light Grey, Charcoal/Dark Grey). Assembly: Edge-aligned tile split for easy bed fitting and mounting. Recommended Print Settings Layer Height: 0.20mm Infill: 8% Gyroid Supports: None required Top/Bottom Layers: 4 Top / 3 Bottom Colour Changes: Easy to achieve via standard layer-height filament swaps at the below layer heights (assuming no change to Z-scale)0.00mm, 1.6mm, 3.0mm, 4.4mm, 5.8mm, 7.2mm, 8.6mm Assembly & Display Printing: Print all tiled sections flat on the bed Joining: Align the seams and secure the using thin CA glue or general purpose adhesive on a mounting backplate. Mounting: Can be hung using Command strips or framed as wall art. Ideal for IKEA Sannahed 50cm frames. If you print this piece, please share your color combinations in the makes section!   Boost MeAll boosts gratefully received :-)